CAR AUDIO SYTEM: Hifonics ZXi 8006

Product Description:

The Hifonics Zeus ZXi8006 3/5-channel amplifier is a 1-piece installation solution to what would otherwise be a complex, space consuming difficult car audio install. All vital features and all the amplification needed to power a high-end car audio install with four upgrade speakers and a subwoofer amp system is included in the Zeus ZXi8006 amplifier. With the ZXi 8006, you will save stress, time, money and space!

The ZXi 8006 provides up to five-channels of amplification, 4-channels producing 110W RMS @ 2-ohms of real power for Front Left and Right channels, Rear Left and Right channels, plus the 5th channel, a 300W RMS subwoofer channel for the most pure bass you have ever heard. Alternatively, the ZXi 8006 has a 2 x 220W + 200W RMS subwoofer mode (@ 4 Ohms only) perfect for trucks, pickups and two-seater sports car applications. If you want something that’s truly out of this world, but is still easy to install, try dual ZXi 8006’s for a system that blasts 4 x 220W for the main four channels and dual 220W subwoofer outputs.

For those who are looking to upgrade a factory OEM "In Car Entertainment" system, the ZXi 8006 offers a theater-like experience with an add-on subwoofer system. Elevate the video magic, and discover new realism in music and video, with a road theater system centered around the ZXi 8006. With its integrated AccuCross control center, the ZXi 8006 can easily create the ultimate listening experience with clarity like you have never experienced. The AccuCross with its on-board signal processing makes it easy to dial-in exactly the sound quality and tonal balance you have always desired!

* Crossover And Switching For Channels 1 & 2:
o Variable 12dB Octave Hi-Pass
o Variable 24dB Octave Low-Pass
o ±18dB Bass Boost at 45Hz
* Crossover and Switching For Channels 3 & 4:
o Variable 12dB Octave Hi-Pass
o Variable 24dB Octave Low-Pass
o ±18dB Bass Boost at 45Hz
* Inputs and Diagnostics:
o Variable Input Level Control
o Power and Diagnostics LEDs
o DC Short Circuit Protection
o Over-Load Protection
* Connector Types:
o Unbalanced Inputs (RCA’s)
o Full-Range Line Outputs (RCA’s)
o Molded 4-Gauge Power Inputs
o Molded 10-Gauge Speaker Outputs
* Crossover and Switching for Mono Amplifier:
o Variable 24dB Low-Pass
o 24dB Fixed Subsonic Filter
o 45Hz Bass EQ Bass Boost
* Hifonics New Illuminated Heat-Sink
* Design With Blue LED Light Pumps
* Hifonics Blue Illuminated Logo
* Maxxsonics Illuminated "M" End Panel Logo
* Audio-Pure Ultra-Fi™ MOSFETS
* Low-Distortion Class A/B Amplifier Circuitry
* With High-Speed MOSFET Output Devices
* Fully Adjustable Accu-Cross™ Crossovers
* 18dB Variable Bass Equalization
* Dash-Mountable Bass Remote Control Included
* Fixed 24dB Subsonic Filter
* Pulse Wave Modulated MOSFET EXVP (Exponential Vari-Power Supply)
* SPC Simpatico Twin-Coil Design
* HSMD Hifonics Surface Mount Design
* Line Output for Amplifier Daisy Chaining
* Gold Oversized 4-Gauge Power Connectors
* 1-year Sonic Electronix warranty

Amplifier Specifications:

* Number of Channels 5
* RMS Power (4 ohms) 55 watts x 4 front/rear channels + 200 watts x 1 sub channel
* RMS Power (2 ohms) 110 watts x 4 front/rear channels + 300 watts x 1 sub channel
* RMS Power (1 ohm) Not Stable
* Bridged RMS Power 220 watts x 2 front/rear channels + 200 watts x 1 sub channel
* Peak Power Output N/A
* Minimum Impedance Unbridged 2 ohms
* Minimum Impedance Bridged 4 ohms
* THD at Rated RMS Power <0.05%
* Speaker Level Inputs No
* Preamp Outputs Yes - 1 pair
* Built-in Crossover Yes - LP/Full/HP
* High-Pass Crossover Frequency Ch 1&2: 50Hz - 4kHz, Ch3&4: 10Hz - 1.2kHz
* Low-Pass Crossover Frequency Ch3&4: 50Hz - 4kHz, Ch5(sub): 50Hz - 400Hz
* Subsonic Filter N/A
* Signal-to-Noise Ratio >95 dB
* Channel Separation >70 dB
* Bass Boost 0 - 18 dB
* Bass/Gain Remote Optional (Not Included)
* Fan Cooled N/A
* Fuse Rating 50 A x 2